Publicité
2 s
Connect to the mains plug with adapter
2
M1
M2
Step 8
To turn off the NOOĀNCE helmet, hold the button for 2 seconds.
IMPORTANT: The NOOĀNCE controller (battery) has a memory in case of a power
failure. In the event of a power failure or accidental disconnection of the USB cable
during use, simply press the start/pause button again. The helmet will resume the
timer from where it left off. To switch off the device, press the ON/OFF
one second. Then follow steps 2 to 8.
Step 1
Connect the helmet to the mains using the correct adapter.
Step 2
Press and hold the On/Off
helmet default start mode 1, and the indicator light on the
NOOĀNCE helmet will always be white.
Step 3
Press the On/Off
indicator light on the NOOĀNCE helmet will flash white.
button to turn on the NOOĀNCE
button again to switch to mode 2, and the
38
button for
Publicité
