Publicité
ENG
DESCRIPTION AND PURPOSE
The shower chair with swivel seat (AT51120) is an assistive device facilitating the performance of
sanitary activities. It is intended for people with reduced mobility for whom it is impossible or diffi cult
to perform daily activities independently. The stool is recommended for use in showers, baths,
bathrooms and other humid rooms, at home and in hospitals. The stool legs are height-adjustable to
ensure maximum comfort for the user.
The product has anti-slip caps. The stool should be cleaned thoroughly after use. Standard cleaning
and disinfecting agents may be used. After the product has been taken out of use, it should be handled
in the way provided for municipal waste.
KEY FEATURES
- 360° swivel function allows the user to turn around without having to stand up.
- seat made of durable and easy-to-clean material; lightweight aluminium frame (corrosion-resistant),
- seat diameter 36 cm;
- 5-stage height adjustment (every 2.5 cm) makes possible to adjust the height of the seat to the user's
height (from 40 to 52 cm);
- anti-slip rubber caps with increased contact surface with the ground guarantee high stability;
- easy and convenient stool folding system without the use of tools.
SPECIFICATIONS:
Basic material: aluminium / plastic
Adjustable height: Yes
Load capacity: 136 kg
Seat height: 40 - 52 cm
Seat dimensions: 36 cm
Distance between legs when the seat is raised to the minimum: L 32 x W 32 cm
Distance between legs when the seat is raised to the maximum: L 33 x W 33 cm
Total weight: 2.38 kg
THIS SIGN MEANS A MAXIMUM
WEIGHT OF THE USER!
INCLUDED: chair, user manual
ASSEMBLY
1. To simplify the installation, place the shower stool on a fl at surface.
2. Place the legs of the stool in the designated holes on the reverse side of the seat (snap fastening).
3. Place the stabilising strut in the intended location (snap-on fi tting).
4. You can now adjust the height of the shower stool. Make sure that the latches are locked and are at
the same height.
DISASSEMBLY
Follow the steps described under , „ASSEMBLY" in reverse order.
NOTES
1. During use and when assembling and adjusting the mechanisms there may be a danger of
entrapment and/or compression of parts of the user's/companion's body in openings/gaps between
components.
2. Always check that all adjustable parts are securely fastened before using the product.
3. Be cautious on wet or slippery surfaces.
AT51120_ins_multi_A5_2.indd 4
AT51120_ins_multi_A5_2.indd 4
- 4 -
2023-10-19 10:20:28
2023-10-19 10:20:28
Publicité
