Publicité
Supplied Parts and Hardware for Step 2
ST 5/16 x 2 3/4"
Lag Screw
A1
x 4
STEP 2
Mount the Wall Plate on the Wall
For mounting on wood stud walls, go to Option A on page 08 to 09.
For mounting on concrete and concrete block walls, go to Option B on page 10 to 11.
Option A
For Wood Stud Installation
1 6 " (
4 0 6 m
2 4 " (
m )
6 1 0 m
m )
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the
lag screws
only until they are pulled firmly against the wall plate
A1
(DO NOT overtighten). Do not use a drill; only use a socket wrench.
• Do not use wall anchors
Wall Plate
03
x 1
≤5/8" (16mm)
Tape Measure
Stud Finder
for this mounting option.
A2
This anchor is for concrete and
concrete block walls ONLY. DO
Wall Anchor
NOT use them in drywall or
A2
wood studs.
x 4
Level
Awl
08
Wall Plate Template
04
CAUTION!
Nominal: ≥2" (51mm)
Actual: ≥1 ½" (38mm)
Nominal: ≥4" (102mm)
Actual: ≥3 ½" (89mm)
7/32" (5.5mm)
Wood Drill Bit
Wall Anchor
x 1
1/2" (13mm)
Socket Wrench
A2
Publicité
