Publicité
1-3 Secure the TV Brackets
For Flat-Back TV, go to Option A on this page.
For Bump, Curved TV, Recessed Holes and Cables, go to Option B on next page.
WARNING:
• DO NOT turn the bolt past the bottom of the hole.
• If the bolt is too short, it may not adequately support the TV.
• If the bolt is too long, it could damage the TV.
• At least 4–5 turns into the threading is required.
• The depth of the bottom holes may be different from the
top holes.
Option A
Use short TV bolts
with washers.
Flat-Back TV
01
02
06
Too Short
Too Long
TV Bolt C1 | D1 | E1
Washer B1 | B2
Publicité
