hymer 280476 Instructions D'utilisation page 15

Safety instructions
Setup:
Be aware of the risk of collision (with pedestrians, vehicles or doors) when placing the product in position.
In the working area, lock doors (with the exception of emergency exits) and windows if possible.
Use the product at the correct
inclination angle.
Only set up the product on a level,
horizontal ground.
Only set up the product
on a solid ground.
Any risks posed by electrical equipment
in the working area must be identified.
This equipment may include exposed
high-voltage wires and other exposed
electrical equipment.
Do not lean the product
against unsuitable surfaces.
Fasten the product above
or below to secure it.
2017-03 | 0095782
Do not set up the product
on an uneven ground.
Do not use the product
on a dirty ground.
Products for accessing high areas
should be pushed out at least
1 m above the leaning point and,
if necessary, fastened.
Before use, make sure the stiles
are fully open.
Ensure that the product is
securely locked prior to use.
Before climbing the product,
ensure that the safety bar
is fully engaged.
EN
15 15