Publicité
EN
Meaning of symbols
Spare part
Caution
Cross reference to other products
or documentation
Cross reference to another page in
this document
Correct installation
Incorrect installation
Optional
Large and small format tiling work
Installation tip
i
Area of application
The BetteLevel support foot is an accessory and can be
used with the BetteLevel installation feet, the BetteFoot
system or the Bette installation systems. With the aid of the
support foot, our Bette shower trays and shower surfaces
can be additionally supported underneath the surface.
Safety information
– The safety, function and integrity of the product can only be
guaranteed if the information provided here is observed.
Failure to do so may result in injury or damage to persons
or property. The manufacturer is not liable for any damage
resulting from a failure to observe the instructions.
– It is essential that you follow the instructions given in the
installation guide in order to prevent installation errors and
damage to the product.
– Please observe the general safety and accident prevention
regulations in addition to the information provided in these
instructions.
4
Important information -
please note
About this guide
– This installation guide must be available for the entire
duration of the installation process. If the installation is to be
carried out by several individuals (e.g. fitter, tiler etc.), then the
installation guide must be passed on as appropriate.
– These instructions must be read in combination with the
assembly instructions of the respective support system.
– The dimensions are given in mm (millimetres).
– The illustrations are not true to scale.
– Subject to technical changes.
Installation information
– Only to be installed by qualified specialists.
– Handle the product with the greatest care in order to prevent
damage. Rings and other items that could damage the
product must be removed before installation.
– Large, bulky or heavy items must be installed by two people.
– Large and small format tiling work should be performed
pursuant to DIN 18157.
Please also observe the separate documentation
(e.g. for waste fittings).
CAUTION!
Unlocking the tension spring!
The tension spring is unlocked by pulling out the
locking clip early. This makes the component
unusable and can lead to injuries when the
spring pops out.
→ Do not pull out the locking clip until you are
instructed to do so in the instructions.
Publicité
