Publicité
Changing and Cleaning the Dust Cup Filter
In order to achieve the best performance, empty the dust cup container
and clean the dust cup filter after each use.
1. To remove the dust cup container, press down on the dust cup container
release button (Fig. 8)
and separate the dust cup container from the main unit.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup container.
4. Rinse the dust cup filter in cold water, and then let it air dry for 24 hours
before replacing it back in the dust cup container.
Important Note: DO NOT use a washing machine to clean the dust cup
filter. Do not use a hair dryer to dry it. AIR DRY ONLY.
5. Replace the dust cup filter carefully into the dust cup compartment.
NEVER operate the stick vac without the dust cup filter in place.
6. Attach the dust cup container to the main body of the unit.
Note: It is recommended that the dust cup filter be replaced every three (3)
months (depending on usage) to ensure peak performance of the unit.
Ordering Replacement Dust Cup Filters
Please Note:
The Dust Cup Filter is washable. It should, however, be replaced every
three (3) months (depending on usage) to ensure peak performance of
your vacuum.
Important:
Make sure that ALL filters are completely dry before re-installing back in
the vacuum.
WARNING:
1. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the unit by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the
appliance.
Publicité
