Publicité
Precautionary Measures
Important: If the suction opening in the unit or the hose is blocked, switch off the vacuum
cleaner and remove the blocking substance before you start the unit again.
1. Do not operate the vacuum cleaner too close to heaters, radiators or cigarette butts.
2. Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3. Before you start vacuuming, make sure to remove large or sharp objects that might
damage the dust cup filter.
4. When pulling out the power plug from the wall outlet, pull the plug not the power cord.
5. Do not pick up anything that is burning or smoking such as cigarettes, matches or hot
ashes.
6. Do not use without dust cup filter in place.
Operating Instructions
Note: Always remove the power plug from the wall outlet before assembling or removing
accessories.
Inserting the Metal Handle Into the Main Body
• On the hand vac handle, pull open the handle port and insert the extension tube until
the locking clip is sitting firmly on the handle.
• Push the handle port closed so that it snaps shut.
Attaching the Crevice Tool and the Floor Brush to the Main Body
• Push the crevice tool or floor brush into the suction hole opening.
The following are recommendations for accessory usage:
Crevice Tool
For radiators, crevices, corners, base-boards and between cushions.
Floor Brush
For all kinds of flooring, including carpeted and tiled floors.
Publicité
