Publicité
Operating Instructions
Caution: The suction hole opening must be open and free of any
obstructions at all times. Otherwise, the motor will overheat and could
become damaged.
Power switch
• push on the power switch to turn on the unit.
• push on the power switch again to turn off the unit.
Using the Unit as an Upright
• Insert the extension tube into the hand vac.
• Choose the appropriate accessory (crevice tool or floor brush) and attach
it to suction hole opening on the hand vac
Note: You may choose not to attach the crevice tool or floor brush when
operating as an upright.
• Press on the power switch turn the unit on. When finished using the unit,
press on the power switch again to turn the unit off.
• When finished using the unit, wind the power cord around the cord
winding hooks for easy storage.
Using the Unit as a Hand Vacuum
• Disconnect the extension tube from the hand vac by handle release
button and removing the extension tube from the hand vac handle. Once
the extension tube is removed, snap the handle port shut.
Note: You may choose to leave the crevice tool or floor brush attached to
the hand vac when operating as such.
• Press the "1" position on the On/Off power switch to turn the unit on.
When finished using the unit, press the "0" position on the On/Off power
switch to turn the unit off.
Publicité
