Publicité
ENGLISH
Lamp Replacement
1. Switch o and disconnect the power from the
oven. Ensure that the internal parts are cool
before touching internal parts.
2. Remove the lamp cover by turning it counter-
clockwise (note, it may be sti ), replace the
bulb with a new one of the same type.
3. Insert the new bulb, which should be resistant
to 300°C. For replacement bulbs contact your
local service centre.
4. If in any doubt, consult a quali ed electrician
for help.
Warning
To avoid electric shocks-please ensure that the
electricity supply to the appliance is switched o
and the appliance is fully cold. before removing
the lamp lens.
Only use 25 W/230V~ type G9, T300
halogen lamps.
EN-28
Publicité
