Publicité
3.
e power socket shall be accessible to users
(such as next to the cupboard) for easy power-
o .
4. After installation is complete, make sure that
the power plug is rmly inserted into the socket.
5. Please refer to the "Cupboard Diagram" for the
requirements of net depth of the cupboard.
e clearance between the cupboard bottom
board and the rear board (or wall) shall not be
less than 50 mm.
Installation steps
1. Please customize the cupboard according to the
"Cupboard Diagram".
2. Before installation, please check for normal
power socket and appropriate grounding, and
check whether the cupboard dimension meets
the installation requirements.
3. Place the appliance in designated locations in
the kitchen, install it in a vertical cupboard,
and connect the power supply.
4. To locate the mounting xing holes, open the
appliance door and look at the side frame of
the appliance (position shown above).
ENGLISH
EN-25
Publicité
