Publicité
STEP 1
1.
Insert 2 wood dowels (A) into wood dowel holes on shelf (4).
2.
Attach shelf (4) to back board (1) by inserting wood dowels (A) into wood dowel holes and
inserting 3 screws (E) through holes on back board (1), then tighten to shelf (4).
STEP 2
1.
Screw 6 cam bolts (C) into cam bolt holes on left side panel (2) and right side panel (3).
2.
Attach 2 keyhole hanging plates (G) to left side panel (2) and right side panel (3) by inserting
4 screws (H) through holes on keyhole hanging plates (G), then tighten to left side panel (2) and
right side panel (3).
Publicité
