Publicité
SHOWER SYSTEM
d) Install the wall holder 14 on the marked position (Figure 9). Cover the thermostatic shower bar to prevent the dust.
Connect the pipe connector to the wall holder and use the Allen key to secure (Figure 10).
Step 4: Assemble the shower head (Make sure there is a washer inside of
the shower head)
a) Connect the hose to the bottom of the thermostatic
shower bar and connect the shower head on the
other end.
Function Guide :
A. Adjust the water temperature:
Press and hold safety button, turn up and down to decrease and increase
the temperature.
B. Switch between the hand shower and overhead shower:
turn the right hand control knob up and down.
Figure 9
5
Figure 10
b) Connect the overhead shower to the arm pipe.
Safety button
EN
B
A
Publicité
