Publicité
To attach the pram, put it on the chassis and press with
both hands until it clicks into place.
Always apply the brakes on the chassis before attaching
and removing the pram.
IMPORTANT: Check that the pram is properly attached.
11 To release it, press the lever under the bassinet and lift it.
12 REMOVING THE LINING: To remove the lining of the hood,
unfasten the 6 buttons on the lower profile.
13 Press the buttons on the two fasteners and remove the
hood.
14 Pull out the flap of fabric under the handle of the hood
and pull out the two rigid supports.
15 Raise the backrest (fig_a) to make it easier to remove the
mattress (fig_b).
16 Unfasten the 6 buttons on the outside of the bassinet and
remove the inner lining.
17 Finally, unfasten the 10 elastic bands on the bottom of
the bassinet and the other 4 positioned close to the hood
fasteners, and remove the outer lining.
18 To replace the lining of the bassinet, do the opposite.
While replacing the outer lining, make sure to slip the
outer rings into the right slots.
19 When placing the lining on the hood, ensure you insert the
rigid supports correctly. Insert the tube bearing the carry
handle into the hood's front slot, ensuring the handle is
centered correctly (fig_a). Pull the flap of fabric out from
the opening on the hood (fig_b) and slide it under the
handle (fig_c).
20 Finally, slip the second metal support into the hood's inner
slot.
21 Fasten the hood to the appropriate supports and fasten
the 6 buttons.
SERIAL NUMBERS
22 Information about the production date of Car bassinet unit
can be found under the base.
• Product name, production date and serial number (fig_a).
PADDING CLEANING INSTRUCTIONS
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
PRODUCT CLEANING
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by
adults.
• Keep all moving parts clean and if necessary lubricate them
with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
THE ORIGINAL ACCESSORY
Martinelli accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product's accessories on www.martinellimilano.com.
MARTINELLI IS A PEG PEREGO
TRADEMARK.
Peg Perego S.p.A. adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Perego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
CUSTOMER SERVICE
If any parts of the item get lost or damaged, only use
original spare parts. For any repairs, replacements, product
information, original spare parts and accessories, contact
our Customer Service:
16
Tel. 0039/039/60.88.610
Email customer.service@martinellimilano.com
All intellectual property rights on the contents of this
manual are property of Peg Perego S.p.A. and are
protected by the laws in force.
FR Français
Merci d'avoir choisi un produit
Martinelli.
AVERTISSEMENTS
IMPORTANT - A LIRE
ATTENTIVEMENT ET À CONSERVER
POUR RÉFÉRENCE ULTÉRIEURE.
La sécurité de l'enfant pourrait être
menacée si ces instructions ne sont
pas suivies.
• AVERTISSEMENT : Ce produit est
adapté pour les enfants qui ne
peuvent pas s'asseoir, se tourner et
s'appuyer sur les mains et les genoux
seuls. Poids maximal de l'enfant : 9 kg.
• AVERTISSEMENT : ne poser que
sur une surface plane, horizontale,
ferme et sèche.
• AVERTISSEMENT : Ne pas laisser
d'autres enfants jouer sans
surveillance à proximité de la nacelle.
• AVERTISSEMENT : ne pas utiliser
si l'un des éléments du Culla
Primonido est cassé, déchiré ou
manquant.
• N'utiliser que les pièces de rechange
17
Publicité
