Télécharger Imprimer la page

Martinelli CULLA PRIMONIDO Mode D'emploi page 8

Masquer les pouces Voir aussi pour CULLA PRIMONIDO:

Publicité

• Before use, inspect handles and the
bottom of the carry cot for checking
presence of signs of damage and
wear.
• Take into account the ambient
temperature and the child's clothing
and ensure that the child is not too
cold or too warm.
The child's safety could be at risk if
these instructions are not followed.
• Do not leave anything in the carry
cot that could present a danger of
suffocation (e.g. non-rigid toys, small
parts, pillows, etc.).
• Do not place Culla Primonido near
a window, patio door or where the
child could reach cord of a blind
or curtain, straps , etc. which could
present risk of strangulation.
• To prevent the formation of mould,
we recommend airing the bassinet
regularly. In particular, remove
the internal fabric lining from the
structure and wipe the base with a
dry cloth.
• During sleep, the internal backrest
and footrest (if any) must be lowered
completely.
• For environmental reasons, no UV
stabilisers are added to the mattress
foam.
The mattress foam may turn yellow
as a result. This does not affect
the quality of the product or its
performance.
• Before unfastening and lifting the
bassinet from the frame, adjust the
backrest to its lowest position.
• Do not add or use mattresses
different from the original one.
• We recommend seeking advice
from a healthcare professional for
information regarding safe sleep.
• WARNING: if present, the storage
pockets inside the pram body
must always remain closed.
• Be aware of the risk of hitting the
baby when putting the carrycot
on the floor, when going through
doors, when being close to furniture
or other rigid elements etc.
COMBINED WITH CHASSIS:
• This item is compatible with the
following products: Carrello Classico.
• WARNING: make sure that all the
attachment devices of the Culla
Primonido are correctly fixed before
using.
14
• WARNING: never leave the child
unattended.
COMBINED WITH STAND:
• WARNING: This product is
compatible with the following
original products: Martinelli Bassinet
Stand.
• WARNING: Do not use if any part
of the stand is broken, torn or
missing.
• WARNING: only use on a firm,
horizontal level and dry surface.
• WARNING: Do not let other children
play unattended near the carry cot
and stand.
• WARNING FALL HAZARD - Before
placing the child in the product
always check that it's properly
latched to Bassinet Stand by pulling
upwards the product once the
operation is performed.
• BASSINET STAND: when the product
is not used, it has to be stored in any
case out of reach of children.
The images referring to the textile details may differ
from the collection purchased.
For more information, consult our website: 
www.martinellimilano.com
INSTRUCTIONS FOR USE
Using the pram
1 HOOD: Lift the hood until it clicks. Fasten the 6 buttons on
the lower profile.
2 To lower the hood, press on the handle and lower it
simultaneously.
3 FOOT MUFF: Slide on the foot muff (fig_a), unfasten the
external buttons of the hood (fig_b), fasten the double
buttons of the foot muff (fig_c) and finally refasten the
hood (fig_d).
4 Fasten the straps as illustrated.
5 The straps can be used to fasten the foot muff to the hood,
so as to protect the child even more against the elements.
Unfasten the sides of the foot muff, unfold it upwards and
fasten it to the hood with the straps.
6 The hood comes with a mesh insert so that the baby can
be seen from any position. Pull the zippers as shown in the
picture and pull the hood further, to reveal the mesh insert.
7 BACKREST ADJUSTMENT: pull the handle outwards and
rotate it clockwise to raise the backrest or anticlockwise to
lower it.
8 FOUR SEASONS SYSTEM: as shown in the figure, it is
possible to adjust the product's air circulation from the
base in order to prevent condensation.
Move the lever to blue for a cool, well-ventilated
environment (summer), or to red to limit the intake of air
(winter).
9 CARRY HANDLE: this is built into the hood. To carry the
bassinet, lift the hood (if lowered) until it clicks and hold
the handle placed above it.
_ Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
_ Before lifting the bassinet, make sure the hood is in the
correct position for transport.
_ Before unfastening and lifting the bassinet from the frame,
adjust the backrest to its lowest position (figure 8).
GANCIOMATIC SYSTEM
10 The Ganciomatic System enables you to fasten the bassinet
quickly and easily, with one simple operation, to the
Ganciomatic base of the Bassinet Stand and the Classic
Chassis (purchased separately).
15

Publicité

loading