Publicité
IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
INSTRUCTIONS FOR USE
Before first use
• Complete a sterilization cycle with 50 ml of white vinegar mixed with 150 ml of water, in the heating
unit, without bottles or any accessories.
• Empty the remaining water into the heating unit.
• Run a sterilization cycle with 200 ml of water, in the heating unit, to rinse.
• Drain remaining water.
Usage
• Before each sterilization cycle, clean all the bottles and accessories with a bottle brush and soapy
water and then rinse.
To start a cycle:
• Pour 120 ml minimum of water into the water tank
It is preferable not to exceed the MAX limit indicated on the water tank.
CAUTION: do not pour water into the air outlet.
• Connect the appliance to a suitable power socket.
• Arrange bottles and accessories as shown :
min 120 ml
• Select the desired cycle mode:
a. 2 in 1 mode
b. Sterilization mode
(sterilization + drying) – 38 min
38
• Press
to start.
• The cycle can be paused during drying, if required, by pressing
7
blinks
c. Drying mode
8 min
30 min
8
30
.
Publicité
