Behringer DIGITAL MULTI-FX FX600 Manuel Utilisateur page 12

12 DIGITAL MULTI-FX FX600
FX Function PAR 1 control
Chorus Effects speed
Flanger Effects speed
Phaser Effects speed
Delay Delay time
Tremolo Effects speed
Pitch Shifter
(slight shifting for fatter sound)
FX Function PAR 2 control
Chorus Effects depth
Flanger Effects depth
Phaser Effects depth
Delay Delay feedback
Tremolo Shape (LFO waveform)
Pitch Shifter Semi tone (pitch interval)
Thank you for showing your confidence in us by purchasing the Behringer
DIGITAL MULTI-FX FX600. This ultimate digital multi-effects pedal delivers
24-bit high-resolution stereo effects including Flanger, Chorus, Phaser,
Delay, Tremolo and Pitch Shifter. Thanks to its extensive tone control plus
additional multi-functional parameter adjustment you'll have plenty of cool
sounds at your disposal to handle every situation.
1. Controls
The LEVEL control adjusts the output level.
(1)
and (3) The PAR 1 and 2 controls have different functions
(2)
depending on the chosen effect.
The FX control lets you chose between six different modulation effects:
(4)
CHORUS: This effect slightly detunes the original signal.
A very pleasant detune effect is created in connection with the
pitch variation.
FLANGER: Originally, the flanger effect was generated with two
tape recorders running synchronously. The same audio signal was
recorded on both machines. If you put a finger on the left spool of
one of the machines, the spool and the playback speed are slowed
down. The generated delay results in phase shifting of the signals.
PHASER: With the phaser, a second, phase-shifted signal is added
to the original audio signal. The resulting sound is thicker and
above all livelier.
PITCH SHIFTER: The pitch shifter slightly detunes the audio signal.
TREMOLO: The tremolo effect is achieved by periodic modulation of
the input signal level. This results in a continuous change from low
to high level that lends a quivering, tremulous sound character.
DELAY: A delay of the input signal with various repetitions.
The ON/BATT LED illuminates when the effect is activated. It also
(5)
serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
(6)
Use the two 1/4" TS connectors IN A and IN B to plug in a stereo
(7)
input signal. For mono use just plug in IN A.
The two 1/4" TS connectors OUT A and OUT B send the signal to
(8)
your amp. Use both connectors if you want to achieve full stereo
effect. For mono use just plug in OUT A.
(2)
(1)
(5)
Detune
(8)
(3)
(4)
(7)
(6)