Table des Matières
Publicité
your blender
• Set skirt into place on blender base, making sure
it is securely seated by twisting jar clockwise until
it snaps into the locked position. You may not
hear an audible snapping sound, but will feel it
lock into place.
• Plug cord into outlet.
• Put ingredients in jar, place lid with filler cap in
place on jar making sure it is pushed down
completely into position.
• Process food or beverages. Place hand on lid when
blending liquids. Push desired button on control
panel to start blender.
• Always turn blender OFF and wait until blades
have stopped rotating before removing jar or lid.
• To remove jar after blending is complete, hold
blender base with one hand, grasp skirt and jar
with the other hand and twist both skirt and jar
together, counterclockwise approximately a
quarter turn to unlock, then lift jar straight up
from base.
• Never place jar onto unit while motor is running.
• Never run empty.
• Never run without jar
4
Publicité
Table des Matières
