Table des Matières
Publicité
your blender
Your Blender
After unpacking the blender, wash everything except
the blender base in warm, soapy water. Dry
thoroughly. Do not place in dishwasher. Wipe the
blender base with a damp cloth or sponge. Do not
immerse the base in water. Care should be taken
when handling the blades, as they are very sharp.
How to Assemble and Use
Important: Your blender jar and cutting blades are
subject to wear during normal use. Always inspect
cutting blades for broken, cracked or loose blades. If
jar or cutting blades are damaged, do not use. Call
our toll-free customer service number to obtain
replacement parts.
• Make sure blender is unplugged. Place blender
base on clean, dry surface to keep foreign
particles from being pulled up into motor during
operation.
• Before inserting blade assembly/skirt, be sure that
the gasket is seated around blade base.
• In order to insert blade assembly/skirt, tilt it
slightly and enter with the serrated blade that
curves up. Move as needed to clear the remaining
blades. To remove, just reverse the process; lower
slightly and in the direction of the serrated blade.
Tilt up and the other blades will clear the jar
bottom opening. Attach blade assembly/skirt onto
jar by screwing the smaller side clockwise onto jar
until secure.
3
Publicité
Table des Matières
