Using The Blenders Special Features; For Continuous Operation; For Controlled Cycle Operation; Pulse Button - Sunbeam BLSBX-3350W-033 Notice D'emploi

Table des Matières

Publicité

features
Using the Blender's Special Features
The six speeds are Purée, Chop, Mix, Liquefy, Shake,
and Smoothie.
The blender has a "Pulse" button that is a controlled
cycle operation. This means it operates only while the
button is held down. All other speeds are continuous
cycle operation. They operate continuously at
whatever speed is selected until the "Off" button is
pressed. Pulse speed is same as "Smoothie", which is
maximum speed.

For Continuous Operation

Rest one hand on top of blender jar with lid securely
in place. Press desired speed button to turn blender
on. Press "Off" button to turn blender off.

For Controlled Cycle Operation

Rest one hand on top of blender jar with lid securely
in place. Press "Pulse" button and hold down for
about 2 seconds. Release "Pulse" button and allow
blades to coast to a stop. Repeat cycles until contents
reach desired consistency. Release of the "Pulse"
button turns blender off. Note: "Pulse" button can
be held longer than 2 seconds as needed.

Pulse Button

For instant control, the pulse function operates only
as long as the button is held down. The blender
motor stops when the button is released.
• Processing hot foods or liquids in the blender may
cause hot liquid to spurt out when the cover is
removed. Always remove the filler-cap from the
cover before blending hot foods or liquids. Jar
will become hot from hot contents. (Please review
Important Safeguards section).
• To add foods when blender is operating remove
filler-cap from container cover and add
ingredients through the opening.
• If blending action stops during blending or
ingredients stick to the sides of the jar, turn
blender OFF. Remove the cover and use a rubber
spatula to push mixture towards blades.
5

Publicité

Table des Matières
loading

Table des Matières