Télécharger Imprimer la page

Fox CIB032 Instructions page 3

Publicité

FOX ELECTRIC PUMP
Thanks for puchasing this product. The Fox Electric Pump is the ideal pump for inflatable products. The intelligent pressure
system allows you to preset the maximum pressure on the LCD screen and the pump will automatically stop inflating once
the pressure is reached. This helps to prevent overinflation. It can also be used to deflate inflatable products which helps
when folding and storing your inflatable.
CONTENTS
Please ensure the box contains the following items before use:
Air pump
4
2
1
11
9
WARNINGS
• Please ensure that the pump is set to the recommended pressure of the product that you are inflating before use.
• Keep out of reach of children.
• Use only12V DC power source.
• Do not use continuously for longer than 20 minutes due to the motor overheating.
Allow to cool for 30 minutes before using again.
• Don't expose the pump to rain or immerse in water.
• Keep the inflation inlet away from face or body.
• Store in a dry well ventilated area.
• Don't remove the hose whilst inflating.
• Don't block the air inlet at the bottom of the air pump
• Don't use if the hose is damaged in any way.
• Do not throw air pump away randomly, be sure to observe your local waste treatment provisions.
• Do not leave the pump unattended during use.
Hose
6
5
7
8
3
10
Instruction Book
Inflation inlet
1
Deflation outlet
2
DC plug
3
Pressure value LCD screen
4
Pressure unit toggle button
5
Pressurising button
6
Decompressing button
7
On/off button
8
Hose
9
Air tap
10
Flexible conduit adaptor
11
3

Publicité

loading