Publicité
Installation
Step 5:
• Check the water flow by filling a glass from the refrigerator water dispenser. If the water flow
is slow or there is "chattering", remove and reinstall the filter making sure it is seated securely.
Check again.
Step 6:
• Run water from the dispenser for 5 minutes at 0.5 gpm (about 2.5 gallons) to clear the system
and prevent sputtering.
NOTE: Initial flow rate may be slower than expected. Full flow rate should be restored within
24-36 hours.
• Check the filter for any leaks. Inspect the mount area and filter bottom for any sign of moisture.
5
Publicité
