4. MAINTENANCE AND CARE OF THE REFRIGERATORS
4.3 Cleaning of drawers
Drawing and stretching variable temperature drawer
Open the variable temperature door to the maximum stroke, hold the left and right sides of the variable
temperature drawer with both hands, lift the tail, exert a little force to pull the whole drawer back for about 15mm
until the support claw of the slide rail is separated from the drawer, then lift the front end of the drawer at a
certain angle, hold the drawer and move horizontally to the inside of the chamber, and then rotate it back and up
to remove the drawer.
Upper freezer drawer
Open the freezing chamber door to the maximum stroke, lift the tail of the upper drawer of the freezing chamber,
pull the slide rail so that it can not jump, push the drawer forward to separate the drawer from the support claw
of the slide rail. Separate the drawer on the side from the support claw of the slide rail with the same method.
Rotate the drawer it back and up to remove it after the slide rail support is separated from the drawer.
Upper freezer drawer
Open the freezing chamber door to the maximum stroke, hold the left and right sides of the lower drawer of the
freezing chamber, lift the tail of the drawer to pull the whole drawer about 15mm to the external side of the
chamber until the sliding rail support claw is separated from the drawer, and rotate the drawer back and up to
take it out.
22