Publicité
3 STRUCTURE AND FUNCTIONS
3.2 Functions
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
Display screen
Temperatur e zone displa y
Operation key
A. Temperatur e downward
D. Freezin g chambe r button
H. Filte r prompt
I. Energy saving Mode
Display
1) Main display control (display control on drawer door)
When the power is on for the first time, the icons will be semi-bright and fully displayed and scrolled from
left to right.
Then the icons will be fully highlighted and fully displayed for 3 seconds. At the same time, the start-up bell
will ring, and then the display will enter normal operation. (When the refrigerator is energized for the first
power, the temperature of refrigerating chamber, freezing chamber and flex drawer is set at 39°F/0°F/37°F
respectively).
Under normal conditions, if there is no door opening action and no key operation for 30 seconds, then the
display will be locked, and the display will be off after 30 seconds at locking status;
When the display screen is not on, if any key is pressed, the display screen will be on normally;
2) Distributor display and control
When the refrigerator is energized for the first time, the distributor display and control will be fully displayed
for 3 seconds and then it enters the normal operation display (water outlet function is default option when
the refrigerator is energized for the first time);
Locking and unlocking
In the unlocking state, press and hold the locking key for 3 seconds to enter the locking state and the
locking buzzer beeps.
In the locking state, press and hold the locking key for 3 seconds to enter the unlocking state and the
unlocking buzzer beeps.
If no key is pressed after 30 seconds, the display screen enters the locking state automatically.
Temperature setting of refrigerating chamber
Press the refrigerating key to select the refrigerating temperature zone, and then press the"-" and "+"
temperature regulation keys to adjust the temperature of the refrigerating chamber. The"-" key is pressed
once the temperature will drop by 1°C/1°F. After the temperature reaches 1°C/34 °F, the"-" key will be
invalid no matter how it is pressed.
The "+" key is pressed once the temperature will rise by 1°C/1°F. After the temperature reaches 7°C/44 °F,
the "-" key will be invalid no matter how it is pressed. The temperature setting range of refrigerating
chamber 1°C /34 °F ~ 7 °C/44 °F. The setting will take effect after locking.
16
A
E
B
C
D
Temperatur e shift gear
B . Temperatur e upward C . Refrigeratin g chambe r button
E . Fle x Drawe r button
J . Loc k button
H
F
I
F . Initial
button
for refrigerati ng the madeice
J
Publicité
