Télécharger Imprimer la page

Summit BeautiFridge COOL1D Manuel D'instructions page 3

Publicité

We have provided many important safety messages in this manual and on your BeautiFridge®.
Always read and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety Alert
Symbol and either the word DANGER or WARNING.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
Before the BeautiFridge® is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the BeautiFridge®, follow basic precautions,
including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
Replace all panels before operating.
It is recommended that a separate circuit serving only your BeautiFridge® be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean BeautiFridge® parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the BeautiFridge® or disconnect the power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
Do not attempt to repair or replace any part of your BeautiFridge® unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
In the event of any damage:
Avoid open flames and anything that creates a spark,
o
Disconnect from the power source,
o
Air the room in which the appliance is located for several minutes and contact the Service
Department for advice.
Replacing component parts and servicing shall be done by factory-authorized service personnel.
APPLIANCE SAFETY
Your safety and the safety of others are very important.
IMPORTANT SAFEGUARDS
DANGER means that failure to heed this safety
statement may result in severe personal injury or
death.
WARNING means that failure to
heed this safety statement may
result in extensive product damage,
serious personal injury, or death.
3

Publicité

loading