Publicité
GB
Press the
key again. Now the hour display of the time flashes. Set the hours with
key. AM and PM indicate whether the time is in the morning (AM) or in the
and
afternoon (PM). AM automatically jumps to PM when the
enough.
After the hour display is set, press
Set the minutes to the current time and finally press
of the system time, the current day of the week is displayed in the upper line, the activa-
tion of the time is signaled by the flashing colons.
DETERMINATION OF THE FEEDINGS
The programming of the proficontrol
feedings individually on 7 days. The control offers the possibility to set the following para-
meters for each feeding cycle individually:
DAY OF FEEDING
Exact time of feeding
Rotation speed or ejection radius of the feeder (signaled by paddle-wheel symbol in the
lower left corner „HI", „MED", „LOW")
Feeding time (1 - 99 sec.)
After you have successfully set the system time, press the
the „FEED" line will now start flashing. This number represents one of a total of 6
feeding cycles.
key again will take you to the next cycle and the next number in the
Pressing the
„FEED" line will start flashing. Once you have reached the desired cycle, press the
key to start setting the individual parameters (we recommend starting with feeding
cycle 1 when programming for the first time). The number in the „FEED" line will now
appear permanently and the day of the week will start flashing.
Use the
or
key to switch between a selection of presets until the desired days
are flashing.
To deactivate a feeding cycle, press the
After the feeding day(s) are set, press
start flashing. Set the desired time (in the same way as when setting the system time).
By pressing the
radius of the feeder („HI" = high speed, „MED" = medium speed
„LOW" = slow speed). Select the desired setting with the
selection with the
key again, now the minute display is blinking.
key you will get to the setting of the rotation speed or the ejection
key. Next, the feeding duration appears and flashes.
or
key. After successful setting
UNIVERSAL
control allows to distribute the
or
key until „OFF" appears in the display.
key, now the hour display of the time will
FEEDING
key is pressed long
key once. A number in
or
key and confirm the
13
Publicité
