Publicité
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DETAILS
Model nr.
Rated Voltage
Rated Frequency
Rated Power
Rotation speed
Max. cutting depth
Cable length
Stroke length
Electronic speed control
Cutting depth steel
Cutting depth wood
Electric motor type
Quick blade change
Soft grip
Gear house material
Handle type
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2022 VARO
POWX0397
POWX0397
220-240V
50Hz
900W
-1
0-2600min
115mm
3m
20mm
Yes
5mm
115mm
Brushed
Yes
Yes
Aluminium
Rotatable handle
84dB(A)
95dB(A)
Max 18.9m/s²
P a g e
| 7
K = 1,5 m/s²
www.varo.com
EN
Publicité
