Publicité
(AB318– AB318MIR)
To find out more about your product, consult the online EPREL database. As defined
in Commission Delegated Regulation (EU) 2019/2016, all information relating to this
refrigeration appliance is available on the EPREL Base (European Product Database
for energy labeling). This database enables you to consult the information and
technical documentation of your refrigeration appliance. You can access the EPREL
Database by scanning the QR code on the energy label of your appliance or by going
directly to: www.ec.europa.eu and searching the reference of your refrigeration
appliance.
3. INSTALLATION INSTRUCTIONS
➢ Before using your unit
▪
Remove the exterior and interior packing.
▪
Carefully remove the appliance from the pallet, and make sure not to damage the
appliance during the unloading.
▪
Unscrew the screw of the support located at the back of your device a sufficient
length (about 5 cm) to be able to clip the provided wall spacer on it.
▪
Before connecting the unit to the power source, let it stand upright for approximately
2 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
Check the condition of the power cable before connecting the appliance to a mains
socket, if it is damaged, do not replace it but contact your after-sales service.
Connect the device to a main socket after having checked that the wall socket is not
damaged.
Note: Do not move unit by lifting either the door or door handle as this may cause damage to
the cabinet.
1. Control panel
2. Ventilation grille
3. Shelves
4. Glass door handle
5. Lighting
6. Lock
7. ON/OFF light button
22
Publicité
