Publicité
DRY 2420
The buttons (9 and 10) memorise the temperature and time set.
When the heating surface is uncovered, the temperature of the appliance may lower
with respect to the temperature set in order to guarantee safety and energy saving.
•
Wait approximately 5 minutes (without positioning garments) until the appliance
reaches the temperature set.
•
Wring out the garments well before positioning them on the appliance, so that
water does not drip from them (Fig. F2).
•
Place the garments to be dried on the heating elements (2).
Do not use to dry down jackets and quilts.
Drying is quicker if the rack is covered with a plastic sheet so that heat is not dispersed.
Do not move the appliance by hand during operation.
Burn hazard!
•
After use, press the ON/OFF button (8) to switch the appliance off.
•
Remove the plug and leave the appliance to cool.
Before performing the cleaning operation,
always disconnect the plug from the power
socket and wait for the appliance to cool
down completely.
Clean all components using a damp cloth, avoiding the use of abrasive or corro-
•
sive materials or detergents.
USE
CLEANING
EN
35
Publicité
