Télécharger Imprimer la page

ohmex DRY 2420 Manuel D'utilisation page 35

Publicité

DRY 2420
• To avoid dangerous overheatings, to straighten the whole power cord
and to use the appliance as described in the paragraph entitled "USE" is
recommended.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from
the mains power supply when the appliance is not used.
• If the power cord of this appliance is damaged, it must be changed
exclusively by a technical assistance centre authorized by the manufacturer,
since special tools are necessary.
The electrical safety of this appliance is guaranteed only when
it is correctly connected to an effective grounding system as
specified by the current norms on electrical safety.
• It's necessary to check this fundamental safety condition and, in case of
doubts, ask for an accurate check of the system by professionally qualified
personnel.
The manufacturer cannot be considered liable for possible damages
caused by the lack of grounding of the system.
• Before performing any operation, turn off the appliance and disconnect the
power plug from the power socket.
• Don't connect the appliance to the power supply through external timers
or remote control systems.
+
Make sure that the appliance is safely placed.
Place the appliance away from sinks and taps.
+
During functioning, the power outlet must be easily accessible
if it's necessary to disconnect the appliance.
GENERAL WARNINGS
EN
31

Publicité

loading

Produits Connexes pour ohmex DRY 2420