Publicité
ASSEMBLY OF THE BREAST PUMP
1. Insert the breast cup (Package Content No. 2) in the breast pump as shown.
2. Fit the anti-spill silicone (Package Content No. 4) together with the anti-spill cover (Package Content No. 5)
on to the breast pump body (Package Content No.2) and press firmly down as shown in the figure.
3. Fix the suction valve (Package Content No. 6) at the lower end of the breast pump see the figure below.
4. To connect the upper part of the breast pump with the wide neck bottle rotate until it fits close.
5. Insert the connection tube (Package Content No.10) into the interface of the anti-spill upper cover. Insert
the other end of the connection tube into the suction slot of the pump. (See picture 6 for suction slot of the
pump for SINGLE or DOUBLE pumping mode).
1
4
USING THE BREAST PUMP
1. Please clean hands before using the product, ensure the parts of
the breast pump are cleaned and assembled accurately as per
instruction in this guide.
2. Relax and be at ease while having a normal sitting posture. Use a
thermal gel breast pad or a hot towel before starting the pumping
process.
3. Use your hand to aim the centre of the breast pump at the nipple
and ensure it is tight and lock without air getting in and out.
4. Power on, press A1 power button. The screen of the machine will
self-test and flicker.
2
5
19
3
6
Double Mode
Single Mode
3
Publicité
