USEFUL TIPS
•
Make sure that your hair is clean and there are no traces of lacquer,
mousse or gel.
•
When in use, place the appliance on a smooth, heat-resistant
surface.
•
During use, do not bring the appliance too close to sensitive parts
of the face, ears, neck or skin.
•
After use, wait for the appliance to cool down completely before
putting it away.
PREPARING YOUR HAIR
•
Wash your hair as normal and brush out any knots.
HOW IT WORKS
This styler is air-driven which means that it works on the same principle
as an ordinary hairdryer: hot air leaves the main body of the appliance
and passes through the plate holes. Both during use and during the
heating and cooling phases, place the styler on a flat, smooth, heat-
resistant surface.
INSTRUCTIONS FOR USE
• Connect the power cable to the power supply.
• Switch it on and set the desired air flow and temperature.
Air flow selection (2)
position 1: medium air flow
position 2: high air flow
• Take a small, fine strand of hair which is the same width as the plate
and place it between the two plates.
• Slide the closed plate down from root to tip.
• Once you have finished drying and styling your hair, switch off the
appliance.
• Remove the straightener from the socket.
o n .
4424_S7301.indd 13
4424_S7301.indd 13
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
MAINTENANCE AND CLEANING
WARNING!
the appliance from the mains
before cleaning or performing
maintenance.
Temperature selection (3)
position 1: medium temperature
position 2: high temperature
Always
disconnect
13
EN
19/06/24 13
19/06/24 13