Saba SBA43UHD194 Manuel D'utilisation page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

device or if it has been exposed to rain or moisture. Repairs are also required if the
device is not working perfectly.
If smoke develops or the device produces unusual noises or smells, power it off
immediately and disconnect it from the mains power. If this occurs, the device should not
be used before it has been inspected by authorised service personnel. All repair work
must be carried out by qualified personnel.
Warning: Cleaning
Make sure the device is unplugged from the mains power before
cleaning. Failure to do so could result in potentially fatal
electrocution.
Only use a clean, dry cloth for cleaning and never use any corrosive liquids (alkalis,
assets, thinners, solvents, etc.).
Place of installation and operating environment
The following measures support the proper functioning of the device and extend its service life:
Only position the device on a stable, flat surface and do not place any objects on the
device. The device is suitable not for use in rooms with a high temperature or humidity
(e.g. bathrooms) or with high levels of dust (e.g. workshops).
The device is very large and heavy. It must only be placed on fitted furniture which is
sufficiently strong to support it and wide enough that the device does not protrude
beyond the edges of the furniture. Alternatively, it can be wall-mounted. To do this, use
a suitable mounting frame and follow the recommendations of the manufacturer.
Operating temperature and humidity: 5 ºC to 45 ºC, max. 80 % RH.
Make sure there is free circulation of air (do not place the device on shelves, on a thick
carpet, on a bed, or anywhere that obstructs the ventilation slots, and leave at least 10
cm clearance on all sides).
Do not expose the device to direct heat sources (e.g. heaters).
Do not expose the device to direct sunlight or bright artificial light.
Avoid contact with water sprays or drips and aggressive fluids and never operate the
device near water. It is especially important that it is never immersed (do not place any
recipients containing liquids, such as drinks or vases, on or near the device).
Never place the device in the immediate vicinity of magnetic fields (e.g. loud-speakers).
CAUTION! Keep candles and open flames away from this product at all times in order
to avoid the risk of fire.
Do not allow foreign bodies to penetrate into the device.
Do not subject the device to major temperature fluctuations, as this can cause
condensation and short-circuits.
Do not subject the device to excessive shocks or vibrations.
Only connect the TV set to a properly installed, easily accessible mains socket whose
mains voltage corresponds to that on the rating plate.
The range of power input for the TV is 100-240V~ 50/60Hz; Do not connect the
TV power input port with the power cable out of the above range.
Intended use of the product
This is a consumer electronics device. It is used to receive TV via an antenna or cable TV
network and to play back multimedia files from the Internet and USB mass storage devices.
It may only be used for private purposes and not for industrial or commercial applications. It
is not intended for medical, life-saving or life-preserving applications.
Only use connecting cables and external devices which are compatible with the product in
terms of safety, electromagnetic compatibility and shielding.
5

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Table des Matières