Publicité
Assembly
1
Base installation
Align the pole (H) with the groove on the base (I) and
x them together using a right-angle bolt (J).
Assembly Tip:
Remove parts from the component before performing installation.
3
Install the rear grill and fan blades
Screw the lock nut of grill (D) clockwise, and in the
meantime, x the rear grill (C). Pull the blade (E) to
rotate after installing, so as to ensure that the blade (E)
can be normally rotated. Lock nut of blade (F)
counterclockwise, and then install the front fan cover.
H
I
J
E
C
D
2
Attaching the motor
Place the motor (A) on the top of the pole (H) and
secure in place using the screw on the motor.
4
Front and rear grill installation
Align the front grill (G) with the rear grill (C).
G
Press the grills (C and G) with both hands.
F
6
A
H
C
Screw
1
2
3
Publicité
