Publicité
Required tools:
Tools
Tips:
1.Clear a working area to allow access on 4 sides. A raised work surface will make assembly easier,It
is easier to install the wall panel on the table.
2.All parts are identified so when working through the instructions page by page the diagrams show
where each part is positioned.
3.Most pre-punched holes need to be fixed with self-tapping screws,and a few holes need to use
self-drilling screws.
4.Before starting, to avoid any accidental injury, we recommend the use of gloves to protect your
hands, safety glasses to protect your eyes and shoes or boots to protect your feet.
5.Please keep children away from your construction site.
6.Most assembly can be completed by one person, assistance may be needed when you reach the
erection stage.
7.Please note: Some local government authorities have rules & regulations on shed installation and
you may need approval to erect this shed.
Steps:
1.Unpack all components from the carton and lay outside your work area and check parts against the
part list.
2.Work through assembly instructions page by page.
3.When assembly completed, place the shed in position and fix anchor to the ground.
4.Clean up all metal pieces and screws.
Gloves
Safety Glasses
Power drill
Screw drive
Ladder
Table
Tape Measure
Pencil
Publicité
