Publicité
ILLUSTRATION
POWER BUTTON
WITH INDICATOR LAMP
(ON/OFF)
(1 = WEAK, 10 = STRONG)
DOOR WITH KEY
FRAGRANCE
BOTTLE
TYPE Q
(200 ML)
20
INTENSITY
CONTROL SCENT
FRAGRANCE
OUTLET
RISER PIPE
OPERATION
1
Place the unit on a flat, solid floor or fix it to the wall.
2
Open the door with the key supplied.
3
Screw the fragrance bottle type Q (200 ml) (available separately) into the holder.
Slide the riser tube into the glass and slowly turn it counterclockwise until it stops.
4
Set the desired intensity control
(1=weak to 10=strong)
5
Plug in the power cable of the unit.
6
Push the power button.
The control lamp lights up. The appliance is now in operation.
7
Close the door.
8
To switch off: Push the power button.
The unit can also be easily disconnected from the mains (e.g. via relay or timer).
Caution: If fragrance is inserted, only move the device horizontally!
HOW TO REFILL OR CHANGE FRAGRANCE
1
Open the door with the supplied key.
2
Switch off the appliance by pushing the power button. The control lamp goes out.
3
Loosen the fragrance glass clockwise and lift it out.
4
Screw a new fragrance glass (bottle type Q, 400 ml) into the holder: let the riser tube
slide into the glass, slowly turn it counterclockwise until it stops.
Note: Cleaning is not necessary even when inserting a new fragrance type.
5
Push the power button.
The control lamp lights up. The appliance is now in operation.
6
Close the door.
MAINTENANCE
No special cleaning and maintenance work (rinsing, washing out, etc.) is necessary.
In case of external soiling, clean the unit with a gentle cleaning agent.
HOLDER
21
Publicité
