Télécharger Imprimer la page

Impecca VP-302W Guide De L'utilisateur page 12

Publicité

AV INPUT
The "AV" input on the projector is for older RCA connections and requires a 3.5 mm AV
cable, such as the following:
Video
HDMI1 / HDMI 2 / HDMI 3
Simply connect your HDMI source to these inputs. HDMI cables carry both video and
audio.
MEDIA PLAYER MODE (USB / SD CARDS)
Your projector has both a USB port and an SD card slot for media playback. Each slot
supports a card or drive of up to 32GB capacity. The projector supports viewing or
playback of .jpg, mp3, or mpeg video. Press SOURCE and select the Media Player. Se-
lect USB or SD if necessary, then the media player interface will appear, allowing you
to play back the content. Most of the play controls are self-explanatory, but here is an
explanation of some of the extra features that you can select during playback:
Mange Playlist
Display information about the
current media.
Remember:
• Only 200 files per folder are supported. Please make sure pictures and other media
do not exceed this limit.
• When adding or removing USB or SD media, power off the projector first, change
the media, then power back on.
Audio (Left)
Audio (Right)
(video)
12
To projector AV
input
Slow Motion (Video)
Step Forward one frame

Publicité

loading

Produits Connexes pour Impecca VP-302W