Impecca VP-302W Guide De L'utilisateur page 10

MOUNTING THE PROJECTOR TO THE CEILING
Ceiling Mount (Front projection)
(Rotate Setting: 2)
Ceiling Mount (Rear projection)
(Rotate Setting: 1)
PLUGGING IN THE POWER AND SOURCE DEVICES
Before powering on the projector:
1. Attach the AC power adapter
(included).
Note:Plug the power cable into
the projector first and then into
the power socket.
2. Attach any HDMI, or AV cables (not
included) to the projector and
also to their source (DVD player,
computer, etc.).
3. Insert any USB drives or SD cards
that will be used.
Note: If you change or remove any
cables, USB cards or SD cards at a
later time, be sure to power off the
projector first, make the cabling
adjustments and then power back
on.
The projector does not ship with the neces-
sary mounting hardware for ceiling mount
installation. It does, however, have a built-in
hanger hole to allow for this type of installa-
tion.
Professional installation is strongly
recommended for mounting the
projector to the ceiling. If you are not
skilled and comfortable with mounting it to
the ceiling, do not perform a ceiling installa-
tion. Never perform any installation without
assistance.
10