Publicité
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
c) Insert the unit into Mounting Collar © and push'it in until "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods as follows.
E
N
G
L
I
S
H
■ Using the Rear Support Strap
(5)
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall of Car,
or some other metallic area.
© Plain Washer
Fire Wall of Car
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt ® on the rear of the unit with Rubber Cushion (Optional), and mount it into the exist¬
ing Rear Support Bracket.
Rear Support Bracket
(existing on the car)
Publicité
