Télécharger Imprimer la page

Beper P203TER202 Mode D'emploi page 11

Publicité

Fan Heater Use instructions
Warning: some parts of the appliance can get really hot du-
ring operation, it is necessary to pay extreme attention in
the presence of children or vulnerable persons.
Carefully read this manual before operating the appliance. Do not
use the appliance near bath tubs, showers, pools or other water
basins.
Warning: to avoid overheating, do not cover the appliance.
Do not place the appliance immediately below a wall socket-outlet.
Keep inflammable objects and materials (such as furniture,
cushions, blankets, paper, cloths, curtains, etc.) at least 1 meter
away from the appliance.
Do not leave the appliance operating unattended: make sure the
appliance is off, and disconnect it from the wall socket.
Warning: the appliance is not equipped with a device to con-
trol the room temperature. Do not use the appliance in small
rooms, when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision
is provided.
Product description Fig. A
1. Handle for transportation
2. Ambient thermostat
3. Function selector
4. Functioning indicator
Operation
Connect the plug to a suitable wall socket. Turn the function selector to the desired function.
Thermostat
Turn the thermostat knob clockwise to increase the air emission (temperature) and to start the heating or the
fan. The operating lamp lights up. Turn the knob counterclockwise to decrease the temperature or turn off
the heating or fan.
Heating function
Select "I" in the function selector to obtain the minimum heat level (1000 Watts). Select "II" to get the maxi-
mum heat level that can be set (2000 Watts).
Turn clockwise the thermostat knob to adjust the heat.
To reach the maximum heating level, select "2" and turn the thermostat knob clockwise.
Ventilation function
Place the function selector on
The Fan heater will emit fresh air. Adjust the thermostat clockwise until the fan starts.
To switch off, position the function selector to the "0" position and rotate the thermostat counterclockwise.
Use the handle to carry or move the fan heater.
(ventilation only).
11
EN

Publicité

loading