Publicité
64 www.aeg.com
Problem
The temperature in
the refrigerator is
too high.
The temperature in
the freezer is too
high.
There is too much
frost.
DEMO appears on
the display
8.1 Warning signal
The warning signals of the control and
signalling system of the appliance are
displayed on the Visual Display.
The system will give out a signal if:
•
Possible cause
There is no cold air circu-
lation in the appliance.
Products are too near to
each other.
Food is not wrapped cor-
rectly.
The door is not closed
correctly.
The temperature regula-
tor is not set correctly.
The appliance is in dem-
onstration mode. (dEMo)
• Until the staff of the customer service
Solution
Make sure that there is
cold air circulation in the
appliance.
Store products so that
there is cold air circulation.
Wrap the food correctly.
Refer to "Closing the
door".
Set a higher temperature.
Keep the OK button press-
ed for approximately 10
second until a long sound
of buzzer is heard and the
display shuts off for a short
time; the appliance starts
working regularly
An error has occurred in the operation
of the appliance. In case the electronic
system of the appliance cannot identi-
fy the real temperature a sign will ap-
pear on the temperature display.
arrive at the spot and solve the prob-
lem, the appliance will continue oper-
ating with the help of a spare pro-
gram.
Publicité
