Publicité
4
Thinnest
3
2
NOTE:
To prevent the game
from tipping over
during windy conditions
or when playing on
grass put something to
weigh down the game
preferably inside the
Storage Tray (#8).
Figure 2
Net Sleeve
Spring Lock
1
Thickest
1
Spring Lock
Detail A
1
7
5
Figure 1
7
SET-UP:
1. Take out the telescoping poles out of the case.
Insert the thickest part of the telescoping pole (#1)
into the holes on the ends of the case (#7) until
you hear the spring pin lock in place. See Figure
2 and Detail A.
2. Once the telescoping poles are secured in the
case, carefully pull from the top pole (#4) until all
the poles are extended and the spring pins
automatically lock in place. See Figure 1.
NOTE: If rubber caps (#11) are not already pre-
installed to poles (#4) slide them on the end of the
tube as shown in Figure 1.
3. Insert the thinnest part of the telescoping pole (#4)
into the sleeve on one end of the net (#5) and then
carefully insert it on the other end. See Figure 1.
TAKE-DOWN:
1. Take-Down is reverse of Set-up, make sure you
store all parts back in the Storage Case.
9
- 2 -
Net Sleeve
Spring Lock
8
10
11
Publicité
