Publicité
LET'S GET STARTED
IMPORTANT: Screenshots and some steps may vary based on the device used to
step up the App.
1: Download the App
Download the Defender Guard app and follow the steps to create an account. An
email account is required for verification.
2. Plug-In Your Camera to Power On
Before connecting your camera to the App, wait 60 seconds for the LED indicator
light to flash green.
LED Status
Flashing
Green
Solid
Flashing
Red
Solid
Green & Red
Alternating
/
Off
Device Status
Ready to set up the device
Working properly
Network disconnected
Failed to set up the device
Booting
Device malfunction
Updating firmware
Power off
LED turned off
12 VDC
1 A
6
Internet
Wi-Fi
Publicité
