Télécharger Imprimer la page

Celduc okpac SO767090 Montage

Publicité

Liens rapides

Single phase Power Solid State Relay
→ Relais statique Asynchrone pour charges fortement inductives, moteurs en AC-53
et applications en gradateur angle de phase
Random Solid State Relay designed for high inductive loads,motors (AC-53)
and phase angle control applications.
→ Sortie thyristors technologie TMS
24 à 510VAC 75A.
Back to back thyristors on output with TMS
expectancy: 24 to 510VAC 75A.
→ Protection en tension sur l'entrée (transil) et sur la sortie (RC+VDR) pour une très
haute immunité aux perturbations selon IEC/EN61000-4-4 & IEC/EN61000-4-5.
Over-Voltage protection on input (transil) and output (RC+ VDR) to have a high
immunity according IEC/EN61000-4-4 & IEC/EN61000-4-5
→ Large plage de contrôle: 3,5 - 32VDC avec un courant de commande régulé.
LED de visualisation sur l'entrée de couleur verte.
Protection aux surtensions sur l'entrée intégrée.
Large control range: 3.5-32VDC with input current limiter.
Green LED visualization on the input.
Input over-voltage protection.
Protection IP20 par volets amovibles sur les bornes.
Etiquette repère disponible en option.
IP20 protection by removable flaps on terminals with optional labels.
→ Construit en conformité aux normes IEC/EN60947-4-3
et EN60950/VDE0805 ; IEC 60335-1/ VDE0700-1 ; UL-cUL
Designed in conformity with IEC/ EN60947-4-3
and EN60950/VDE0805 ; IEC 60335-1/ VDE0700-1 ; UL-cUL
Dimensions
Optional labels
CAD documents:
www.celduc-relais.com/uk/plan3d.asp
2
(*) TMS
=Thermo Mechanical Stress Solution
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
okpac
®
Relais statique monophasé
de puissance
2(*)
permettant une longue durée de vie:
2 (*)
technology with a long lifetime
1/L1
2/T1
4/A2-
LED
3/A1+
FILE Nr. E69913
REG.-Nr.10102
1/L1 et 2/T2 peuvent être inversés
1/L1 and 2/T1 can be swapped
Le relais doit être monté sur
dissipateur thermique.
SSR must be mounted on heatsink
celduc
r
e
l
S/MON/SO767090/D/04/03/2013
page 1 / 6F/GB
SO767090
Output : 24-510VAC 75A
Input : 3.5-32VDC
Avec étiquette de repérage
en option
With optional labels
Secteur AC /
AC Mains
Charge /
Load
®
a
i
s

Publicité

loading

Sommaire des Matières pour Celduc okpac SO767090

  • Page 1 4/A2- 3/A1+ dissipateur thermique. SSR must be mounted on heatsink Charge / Load CAD documents: www.celduc-relais.com/uk/plan3d.asp (*) TMS =Thermo Mechanical Stress Solution celduc ® Proud to serve you All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis.
  • Page 2 5, Rue Ampère BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tél. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21...
  • Page 3 Dissipateurs celduc standard/ Standard celduc heatsinks: - 6K/W correspond à un relais monté sur un adaptateur DIN celduc type 1LD12020 6K/W corresponds to a relay mounted on a DIN rail adaptator like celduc 1LD12020 - WF210000/ WF151200 = 2.1- 2.2K/W - WF121000 /WF108110 =1.1-1.2K/W...
  • Page 4 5, Rue Ampère BP30004 42290 SORBIERS - FRANCE E-mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tél. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21...
  • Page 5 For heatsink mounting, it is necessary to use thermal grease or thermal pad with high ® conductibility specified by celduc ® An adhesive model (5TH23000) mounted by celduc on the SSR is also available: please contact us. Poussez Thermal pads et fermer.
  • Page 6 ® Etant donné que les autres materiels ou interconnexions ne sont pas de la responsabilité de celduc , il est de la responsabilité du réalisateur du système de s'assurer que les systèmes contenant des relais statiques satisfont aux prescriptions de toutes les règles et règlements applicables au niveau des systèmes.