Publicité
Maintenance Instructions
Daily inspection & maintenance
The appliance, gas pipes and hoses should be checked and maintained
by a qualified installer every 6-12 months. If you find joints that are not
tightly secured or if there are cracks or corrosion anywhere, you should
stop using the appliance and perform the necessary maintenance
immediately.
CAUTION: The appliance will still be hot shortly after use. Avoid draining
off the residual water until the water cools down, to avoid being scalded.
Users should regularly use the soapy water to wipe on connecting part
of each pipe to test whether the gas leakage has.
Clean the accumulated dirt and dust on the casing of the appliance
by cloth regularly. Do not use chemical or volatile solvent.
Use a neutral detergent to clean all surfaces and areas then wipe it
dry. Taking care not to allow water to enter the top vent.
Before each use, check the stainless steel filter on the "WATER INLET"
pipe is in place and clean if have any particles.
Do not submerge the appliance in a sink or container.
Do not use abrasive cleaners or bleach.
NOTE
Do not drop dirt and dusts into the fire holes of burner and electric parts,
do not loosen or damage other parts as well. To re-fix the parts after
cleaning, refer to the installation requirements.
Keep tidy and clean around the appliance
Regular cleaning should be done in order to keep the surroundings of the
appliance tidy.
If the area is not tidy, cockroach instructions or accumulated cobwebs
may occur, which could cause the appliance to malfunction or a fire
accident to occur.
17
Publicité
