The Control Panels; Command Keys; Display; Knobs - FULGOR Milano Sofia 30 Guide D'utilisation Et D'entretien

The user interface has the following features: display, preheat light indicators, keys for commands, cooking mode and temperature
selectors.
COOKING MODE DISPLAY

Command Keys

Touch this key to enable special functions, low
temperature modes or to enter special menu.
Touch this key until "SET TIME" appears to set
or change the time of day. Touch this key until
"TIMER" appears to set, modify or clear the minute
minder value. Once a cooking function has been
selected, touch this key until "TIME" appears in
order to set, modify or cancel the cooking time.
Touch this key until "STOP TIME" appears in order
to set, modify or cancel the end of cooking time.
Whenever one of the former modes has been
enabled and its digits flash, touch or hold:
Key to decrease the value.
Key to increase the value.
Touch to switch the oven lights status.
When a cooking function has been selected,
touch this key to enable the fast preheat mode.
The fast preheat is not available for all functions.
CONTROL PANEL
TIME MULTI-FUNCTION DISPLAY
DIGITAL TOUCH COMMAND KEYS
MODE SELECTOR

4 - The Control Panels

TEMPERATURE SETTING DISPLAY
PREHEAT LEVEL INDICATOR
TEMPERATURE SELECTOR

Display

Central Display for time and miscellaneous functions: for time of
day, minute minder, automatic cooking. AM/PM indication is
also present.
Miscellaneous indications are also available to show which
cavity is currently selected and whether any door has been
locked, automatically for self-clean or manually by the user.
Display for Temperature indications: Degree unit (°C or °F)
indication is present. It shows the temperature set-point for the
current cooking mode, in the selected cavity.
Display with writings for Cooking Modes indication to indicate
which function has been selected.

Knobs

Cooking mode selector (multifunction), with eight cooking
modes + OFF position.
Cooking mode selector (thermal), with three cooking modes +
OFF position.
Temperature selector with PRESET and CLEAN positions +
continuous range between MIN and MAX values.
EN
9