Publicité
any other way or if it does not work properly. Do not try to repair the defected product
yourself because it can lead to electric shock. Always turn the damaged device to a
professional service location in order to repair it. All the repairs can be done only by
authorized service professionals. The repair that was done incorrectly can cause hazardous
situations for the user.
22. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
23.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
24. Do not allow the motor part of the device to get wet.
25. Do not touch the hot surfaces of the device.
26. After turning off the appliance, before cleaning or storing it, disconnect the power plug
from the socket and allow the equipment to cool down. Please wait long enough because
the heated device cools down slowly.
27. Do not use aggressive detergents in the form of emulsions, milks, pastes, etc. to clean
the housing, as they may, among other things, remove informative graphic symbols such as
scales, markings, warning signs, etc.
28. The device is not designed to work with external schedulers or separate remote control
system
29. Do not cover the device, it might cause the accumulation of heat in its interior and it may
cause damage or fire.
30. Hairsprays contain flammable materials. Do not apply them while using the device.
31. Do not use the device on people who are sleeping.
32. During operation, do not place the device on wet surfaces or clothes.
33. During operation of the device, metal elements heat up to high temperatures. Do not
touch hot parts of the device with your bare hands and do not allow contact with the scalp,
as this may result in burns.
DESCRIPTION OF THE DEVICE
1. On/Off button
3. Handle
6. Silicone cool touch tips
USING THE DEVICE
To achieve the best results in hair straightening, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use
the correct temperature setting for your hair type.
1. Before starting the device, the electrical wire should be fully unrolled.
2. Insert the plug into the socket.
3. Press the On/Off button (1) until the unit turns on and LCD display lights up.
4. Adjust the temperature using the temperature buttons (2). During heat up time, the LCD temperature display will pulse from 0 to 5 blue
lines until the desired temperature is reached. When the appliance reaches the desired temperature, the pulsing will stop, and all 5 lines
will be displayed. Wait 15 seconds to allow the appliance to reach its working temperature.
5. Starting from the top of the head choose a small strand of hair and straighten it and comb.
6. Then put it between the plates (7)
7. Move slowly away in the direction from the roots to the ends of hair.
NOTE: The device is hot during operation. Do not touch the plates to the scalp or hands.
8. Repeat with the next strand until all the hair bands will be stretched.
9. Wait until the hair cool down and comb them.
10. After finishing work, turn off the straightener. Press On/Off button (1) and hold it for about 3 seconds until the LCD display turns off.
Then unplug the power cord from the outlet.
AUTOMATIC SAFETY SHUT-OFF
After approximately one hour, the device will automatically shut itself off. To reactivate the device, press the On/Off button (1).
HINGE LOCK
This device has a closing lock switch (5) to make it easier to store. To lock the hair straightener, simply squeeze the handles (3) together
and push the lock (5) to the locked position. To unlock, switch the lock (5) to the unlock position.
NOTE: Do not heat the device in the locked position.
2. Temperature setting +/- buttons 130ºC - 190 ºC ... - 230ºC
4. Blue LCD display
5. Lock
7. Titanium plates
8. Stand
4
Publicité
