Publicité
CARE INSTRUCTIONS
1/ Your product
Properties
Aluminium is a light, resistant material that doesn't rust.
Tempered glass is a glass that has endured a thermal treatment. If it breaks it breaks into little
non-sharp pieces.
The surface of the tempered glass is smooth, non-porous and easy to clean.
Resin wicker PE (polyethylene) is a recyclable plastic material (polyethylene.) Its braiding is
done by hand.
Polyester is a synthetic fabric that offers good resistance to tearing and rubbing.
Manufacturing and assembly
The manufacturing then assembly of this product requires leaving clearance between the
different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres between the
different assembled elements (between two slats, between boards...).
This tolerance necessary for the correct realisation of your product can be behind little
geometric differences.
This does not lead to any loss of function of your product.
Irregular appearance
Each product is manufactured and assembled industrially from parts whose surface treatment
is carried out individually, before assembly. These metallic elements cannot be free from
appearance irregularities coming both from the surface treatment process and assembly
operations. The final appearance of the product is therefore directly linked to these possible
irregularities.
Regularity of seams
Although we pay special attention to the quality and regularity of seams, it is possible to notice
that some threads are not cut after the break point of the seam. There is no risk of the seam
becoming undone. Cut this thread with a simple pair of scissors.
Regularity of the braiding
This garden furniture is entirely hand braided. The braiding technique consists in an intertwin-
ing of synthetic resin strands around a metallic structure. It is possible to observe braiding
tension differences. At each break point, the end of the strand in addition, ranging up to a few
centimetres, is inserted into the braiding. If this strand comes out, put it back in place. There is
no risk of the braiding becoming undone.
Synthetic resin imitates natural rattan. Rattan has appearance irregularities that give it its
unique character. The manufacturing process reproduces these variations in look and shade.
2/ Precautions for use
Do not put hot objects on the table itself, they will leave permanent marks on it (discoloration,
deformation, cracks...). Always use table mats.
Do not use a plastic tablecloth on the table. Exposed to UV and heat, it would melt and act as
a decal, especially on steel, aluminum and glass. This would result in irreparable deterioration
of the tray in the form of white streaks. Instead, use a fabric tablecloth.
Publicité
