Publicité
Q.
How can I connect a New version of the Zeus with
an old Control Panel Plus 1.0?
A.
You just need the LUMM0018 LED controller cable (3-pin)
You need one per each area of the control panel,
to connect the first unit only.
Q.
How can I connect the old version of the Zeus with
the new version in series and vice-versa?
A.
If you want to connect the old Zeus with the new one
in series you need the: Lumatek LED Daisy Chain Control Cable
to link Previous to Latest Version Zeus (2 Pin - 3 Pin) LUMM0026
Viceversa, if you want to connect the new Zeus with the old one
in series you need the: Lumatek LED Daisy Chain Control Cable
to link Latest to Previous Version Zeus (3 Pin - 2 Pin) LUMM0027
PLEASE NOTE; When connecting both old and new Zeus' to the same
control panel (1.0 or 2.0), a new Zeus must be first (start) in the series
within each Zone used.
Q.
Do Lumatek Zeus LED Fixtures have
Universal Control Systems Compatibility?
A.
Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or
with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an
RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
Lumatek LED Daisy Chain Control Cable to link Zeus and Universal Controllers (0-10v to RJ Ethernet)
LUMM0028
1.
Controller
2.
Lighting Control Adapter
3.
Splitter
4.
LED Lighting
1.
3.
2.
4.
Publicité
