Publicité
HID + LED
LUMM0019 LUMATEK DIGITAL PANEL PLUS 2.0 (HID + LED)
WORKS WITH:
ALL HID BALLASTS
(Same control link cable) (mini jack to mini jack).
THE NEW VERSION OF ZEUS via:
From controller to first Zeus you need LUMM0018 LED
CONTROLLER CABLE (3-pins), two units already come
with the CONTROL PANEL PLUS 2.0 (LUMM0019).
To connect several New versions of Zeus you need
LUMM0015 DAISY-CHAIN 5m CONTROL CABLE for each
unit apart from the first (that is connected to the Panel).
You can connect up to 100 units per controller,
50 in each of the two different zones
The Control Panel Plus can manage independently each zone.
REMOTE USE via:
LUMM0016 LED 5m EXTENSION
CABLES (2pack)
To use the driver away from the fixture, you
need one per every Zeus.
(new version – units sold after October 2020)
LED CONTROLLER
CABLE (3PINS)
PRODUCT CODE
LUMM0018
Designed to link Lumatek Zeus LED
fixtures together in series to be
externally controlled with the Lumatek
Control Panel Plus.
DAISY CHAIN 5m
CONTROL CABLE
PRODUCT CODE
LUMM0015
This 5m long Control Link Cable is
designed to daisy-chain your LUMATEK
Controllable LED Fixtures allowing a
stable and precise connection without
any interference.
LED 5m
EXTENSION CABLE
PRODUCT CODE
LUMM0016
Z
These two 5m long Extension Cables are
designed to connect the Lumatek driver
and LED fixture, in case the driver is
used remote and away of the fixture.
Allowing a stable and precise connection
without any interference
Publicité
